Techne PrimeG User Manual download pdf (Page 17)

PRIME SPECIFICATION

TEMPERATURE

Block temperature range 4ºC (10°C during cycling) to 100ºC

Block uniformity (at 55ºC) <±0.3ºC

Temperature accuracy (at 55ºC) <±0.25ºC

Gradient availability (PrimeG only) Between 30ºC and 80ºC

Maximum gradient (PrimeG only) 29ºC (25°C Combi-Block; 19ºC 384-well block)

Minimum gradient (PrimeG only) 1ºC

Column uniformity with a 10ºC gradient

(PrimeG only)

<±0.3ºC

Pre-run sample cooling Yes, 4ºC

Temperature set point adjustment 0.1ºC

HEATING/COOLING RATE

Maximum heating rate 3.4ºC/s

Minimum heating rate 0.1ºC/s

Maximum cooling rate 1.0ºC/s

Minimum cooling rate 0.1ºC/s

HEATED LID

Selectable heated lid temperature 35 to 115ºC or off

Lid uniformity ±5ºC

Pre-heat lid Yes

Warm up time from ambient <2 min

Over-temperature cut-out Yes

Regulated heated lid pressure Manually adjustable

The heated lid is only operational if the block temperature is set above 35ºC

PROGRAMMING

Program interface 5.7” colour VGA LCD touch screen

Maximum number of programs stored 1000

Maximum number of stages per program 10

Maximum number of steps 10

Maximum number of cycles per stage 99

Programmable ramp rate Yes, 0.1ºC/s steps

Maximum hold time 4h 59m 59s

Minimum hold time 1s

Gradient calculator (PrimeG only) Yes

Incremented/decremented temperature Yes

Incremented/decremented time Yes

Pause facility Yes

Program naming Alpha numeric plus symbols

Password protection Yes

Keyword selection Yes

Run completion time Yes

End of program alarm Yes

Auto resume on power failure Yes, always or never

Oligonucleotide T

calculator Yes, based on the Nearest-Neighbour method

Software updates Free of charge from www.techne.com

Breslauer, K.J.; Frank, R.; Blocker, H. and Marky, L.A. (1986) Proc. Natl. Acad. Sci. USA 83, pp

3746-3750.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 66 67

Comments to this Manuals

No comments

Techne PrimeG User Manual Page 17

Comments to this Manuals

Related products and manuals for Equipment Techne PrimeG