Techne Sample Concentrator User Manual download pdf (Page 5)

SAFETY ADVICE BEFORE USE

OPERATOR SAFETY

All users of Techne equipment must have available the relevant literature needed to ensure their safety.

It is important that only suitably instructed personnel operate this equipment, in accordance with the

instructions contained in this manual and with proper safety standards and procedures.

SPECIFICATION

Maximum vertical travel 320 mm

Maximum gas pressure 2 psi

Maximum gas usage 15 litres/min

Gas Any inert gas (often nitrogen)

Needle positions Variable to suit Techne Dri-Blocks

Gas Intake Nozzle Diameter 6.35 mm (1/4")

Height 530 mm

Width 240 mm

Depth 295 mm

Weight 3.5 Kg

INSTALLATION

For packing purposes the Sample Concentrator is supplied unassembled in three parts; the base board,

the column and carriage, and the gas chamber. The unit is re-assembled as follows:

1. Unscrew the column fastening knob from the column support bracket already fixed to the base

board. Locate the column on the two pins in the support bracket. Screw the fastening knob through

the rear of the column and tighten firmly.

2. Insert the locating pin on the rear of the gas chamber into the front of the carriage aligning the

indent in the chamber with the positioning pin on the carriage. Tighten the locking knob.

1 2 3 4 5 6 7 8 9 10 ... 15 16

No comments

Techne Sample Concentrator User Manual Page 5